AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Dnr 202l8/23/2023 ![]() ![]() Please visit for firmware, documentation, the HDD Viewer software, and other resources inclucing FAQs. Step 15: Here you can either enter your mydlink account information to add the DNR-202L to your account, create a mydlink account, or skip. Once all the cameras you want are checked, click Next. Enter the admin password for the camera and then click OK. Fixed DLAB Bug DBG15020253: Wizard couldn’t search any camera is the same LAN subnet as DUT to add but SetupWizard SE could. Fixed DLAB Bug DBG15020251: DUT default IP would be 0.0.0.0. When you click the box, a password box will appear. Fixed send the incorrect URL to DNR-202L will crash. Click Rescan if they are not showing up.Ĭheck the box next to all the cameras (up to 4). The software will scan for cameras on your network. Step 14:Once formatting is complete, you can now add your camera(s). Do not turn off the DNR-202L or remove your hard drive(s) during this process. Note that formatting may take several minutes. Wait for a green check mark and then click Next. Step 12: Connect the USB drive(s) if you haven''t already. Step 11: Select your time zone and then click Next. This is the administrator password for the device and is used to access the user interface. Step 10: Create a password for your DNR-202L. Once found, click it and then click Next. Step 9:The software will scan for your DNR-202L. Step 8: When the LED on the DNR-202L is blue, click Next. Step 4: Run/launch the software once downloaded. This can be found on the Included CD or can be downloaded here (under Downloads). Step 3: Launch the DNR-202L Setup Wizard. If your USB drive included a power adapter, connect to your drive and plug it in. Step 2: Connect a USB hard drive (or 2) to the DNR-202L. Step 1: Power on your DNR-202L and connect it to your router (or network) using an Ethernet cable. All Data on the drive(s) will be permanently erased.Īlso, cameras you want to connect the DNR-202L must already be installed and connected to your router/network.You must know the login password for your camera(s). Important Note: When connecting a USB drive to the DNR-202L, it will need to be formatted by the device in order to function. Q:How do I install and set up my DNR-202L?
0 Comments
Read More
Leave a Reply. |